Hardware reverts to the original factory method:IPCAM?

• This work will restore the IP CAM to the original factory default, there are two reset methods according to the model:
• Use the reset button:
  1. After unplugging the power cord, press and hold the reset button.
  2. Press and hold the button while reconnecting the power cord.
  3. Keep holding the button for about 8~10 seconds.
  4. When the reset is complete, release the button.

       5. Default Account / Password / IP / Port Number / Configuration:
• Account/Password: admin/admin
• IP Address: 192.168.0.88
• Port Number: 80
• IP CONFIGURATION: DHCP, WHEN YOU CONNECT TO A DEVICE WITH DHCP SERVER, THE IP WILL BE AUTOMATICALLY RE-ASSIGNED, PLEASE CONFIRM THE NEW IP ADDRESS AND RECONNECT.